{"id":718,"date":"2017-01-23T13:22:05","date_gmt":"2017-01-23T13:22:05","guid":{"rendered":"http:\/\/weldermagazine.com\/?p=718"},"modified":"2021-08-20T17:06:32","modified_gmt":"2021-08-20T17:06:32","slug":"welding-helmets-review-2017s-best-welding-helmet","status":"publish","type":"post","link":"https:\/\/weldermagazine.com\/welding-helmets-review-2017s-best-welding-helmet\/","title":{"rendered":"Welding Helmets Review-2018\u2019s Best Welding Helmet"},"content":{"rendered":"

Introduction of Best Welding Helmet:<\/h1>\n

Whenever you go to the factory for work, your loved ones stay worried. It\u2019s natural to worry about the tough jobs you do outside of the usual office space. Tasks like, welding<\/a>, civil engineering, building machinery, repairing machinery, large welding are rough jobs to do. Even when you are melting steel is a dangerous job if you don\u2019t have sufficient protection. In these cases, people use Best Welding Helmet to save themselves while working. Welding helmets are not like those typical masks we use while biking and all. It is specially made to protect the human head. Manufacturers build these welding helmets with such materials so that they can shield people’s head from fires, UV rays, IR rays and other radiations. But not all of the helmets are made with same materials.<\/p>\n

Types of Welding Helmet:<\/h3>\n

There are various types of helmets available on Amazon and in the local markets as well. Most welding caps incorporate a window secured with a channel called a focal point shade, through which the welder can see to work. In many caps, the window might be made of tinted glass, tinted plastic, or a variable-thickness channel produced using a couple of enraptured focal points. But wherever you buy welding machines from the main features are quite common. You may check the following specifications before purchasing a welding helmet, is the helmet is auto-darkening, or it has a standard glass lens. Is it fixed or variable shade, the switching speed, the solar power and battery life, adjustable sensitivity and delay controls, the weight of the helmet, and last but not the least the national safety standard<\/a>.<\/p>\n

Passive welding helmet:<\/h4>\n


Let me talk about the norm glass helmet or passive helmet. Things can happen like when you are going to buy a helmet; they may confuse you. Like, passive helmets are less expensive, but it has disadvantages. Passive helmets are very familiar from many years now. They are almost the same now which they were 40 years ago. The glass is a bit stronger, and the outer side is made of thick plastic which was made of leather in early days. These were the changes. The cost will not to be exceed your budget. That means these are budget friendly.<\/p>\n

This welding helmet provides basic protections time to time. The glass or the lens usually protect rays like UV, IR, and some weak radiations. At the point when the welder is prepared to start welding, a quick gesture or snap of the neck flips the head protector down before striking a curve. Whenever completed, the welder ranges to turn the head protector into the bright blue sky from his face to see the work piece and to re-position for the resulting weld.<\/p>\n


Standard or passive helmets are inexpensive, but they have various disadvantages too. Like, the beginners will feel very disturbing as they have to move the front glass several times while welding. You will feel irritating when you stop welding and then remove the mask to see the work then again take on the cover and start working. You may not keep the torch\/gun in the right place after lowering down the helmet. When welding in confined spaces, for example, under autos or trailers, there isn’t sufficient space to flip a head protector all over. You will feel neck pain after flipping the mask up and down unlimited times. What’s more, at last, lifting and bringing down a protective cap is wasteful particularly while doing a considerable measure of tack welding.<\/p>\n

Auto-Darkening Welding Helmet:<\/h3>\n

On the other hand, an auto darkening helmet is multi-functional, and it is much more useful than the passive one. It has excellent features, and it is not too expensive either. Rather than a standard bit of tinted glass, caps with auto-obscuring channels in auto darkening helmet, you can have an electronic channel focal point and frequently are furnished with free components to make welding simple. The way I see it in many workstations, auto darkening helmets make individuals\u2019 job faster, better. Auto darkening helmets have filter lens or ADF which is an exclusive crystal display (LCD<\/a>). It is similar in pattern to the technology used in the making of a digital alarm clock.<\/p>\n


Most channel cartridges are fueled by a blend of battery and sun based power. A few light sensors are mounted close to the focal point to identify the welding circular segment. At the point of working when the coordinator is not actuated, an auto-obscuring LCD channel, for the most part, has a #3 or #4 shade, which is moderately simple to see through, like shades. Thus it makes arc initiates a lot easier as the welder can look at the position of the MIG gun, TIG light\/torch towards the material he is welding.<\/p>\n

Once an arc is created, sensors on the helmet make darkening the lens to the shade #9 to #13 depending on the setup, really fast even more quickly than the blink of an eye. Since the channel has UV and IR coatings connected to it, eyes are shielded from destructive beams paying little respect to active\/dormant shade setting. The most important thing is that the helmet always stays down whenever you want. Before the work, during the work and even after the work. That is why auto darkening welding helmets help millions of people to work efficiently with safety.<\/p>\n